Full Spectrum Indoor Hydroponics Garden

  • Save $0.00



Features:
Plug in the power, the red light will be on, the light will automatically adjust the brightness with the ambient light, and enter the timing state
The timing is set to 16 hours fill light + 8 hours rest.

How to use: Press the key to white light, press and hold the switch to cycle the brightness: [1st]->[2nd]->[3rd]->[Red]->[Full], and cycle.
Built-in water level sensor, peripheral water level line, in the busy life work, never forget to add water to the plants.
The new hydroponic technology and special planting medium avoid the pest pollution caused by the soil and prevent mosquito growth.
At the same time, space meteorite media is used to increase the germination rate of plants, which is more suitable for plant growth.
Special intelligent lighting and sink setting: Through the study of the spectrum of sunlight, the special LED lamp beads are used to fill the plants to make photosynthesis, so that the plants have sufficient sun and water supply, while avoiding outdoor wind and rain. 

Specifications:
Material:ABS
Color:Blue
Size:Approx.257x111x108mm
Power Adapter: Input: AC 100-240V Output: DC 16V 1A
LED lamp power: 8.5W (white light: 0.5Wx10, red light: 0.5Wx5, blue light: 0.5Wx2)
Luminous flux: 5500km
Lamp efficacy:60 lm/W
Color temperature: red light 660NM, blue light 460-470NM
Protection level: IP42
Control method: automatic / manual
Working life: ≧35,000 hours
Height of the machine after assembly: 376mm
Water storage capacity: 1.5L (1500ML)
Planting species: flowers, herbs, vegetables, fruits
Plug type:EU/US

Package included:
1pc x Planter
1pc x Planting box
1pc x Controller and Light Bar
1pc x  Power Adapter
1pc x Instruction Manual
1box x Planting Medium
.

Key operation:
1. Connect the power supply.
2. Press the button to enter the fully open mode (red, blue and white light) full automatic mode, the machine automatically detects
After the ambient brightness, decide the work start time and rest time (work 16 hours, rest 8 hours)
And the brightness will be adjusted automatically according to the environment.
3. Press the button again in full-open mode to enter the planting mode (red and blue light). In this mode,
The machine will calculate working hours and rest time from this time (work 16 hours, rest 8 hours).
4. Press the button again in the planting mode to enter the lamp mode (white light). Long press the switch in this mode,
The brightness is adjusted in three steps.
5. Press the button again in the lamp mode to shut down.
Note: The machine will restart the calculation of working hours and rest time after each shutdown or switching mode.


 


We Also Recommend


Click to edit the product in Ali Orders.
Note: only show for shop owner